Fender jazz bass product dating
Since the neck is only a component of the guitar, it could have been produced a number of years before the actual instrument was assembled, hence the date on the neck is not necessarily the production date of the whole guitar.On early ’50s Stratocaster guitars serial numbers were stamped on the back vibrato cover plate.Date format is usually M-D-YY and often features the woodworker’s initials as well.1954-1959: Same as above, only the format is M-YY, leaving out the day. March 1962 to 1965: Dark blue or red ink stamps below the truss rod adjustment at the neck butt. The “XX” does not refer to the day; it is a code for the neck type (e.g. The “W” stands for neck width: “A” is the narrower, “B” is normal width, and “C” wider and “D”, though rarely seen, is the widest.On some Telecaster guitars the serial number is found on the bridge plate between the pickup and the saddles.From the production of the first solidbody Fender guitars and until 1976, Fender tagged a production date at the butt of the detachable neck of their guitars.The approximate production year can be determined from this (more about serial numbers will follow).
April 1973 to 1980: After March 1973, Fender dropped the old style date stamp and continued to use the new style, 8-digit code. 1976 to present: All non-vintage reissue instruments have the serial number printed on the decal on the face of the peghead.
From 1972 through about March 1973, this new system was used concurrently with the previous “XX MMM-YY W” format.
Again, a neck was stamped with either the new or the old date stamp, but not both.
The neck stamps on Fenders from 1969 to 1971 can be most logically translated by reading from right to left.
For example, let’s take a Stratocaster with the serial number 279515 and the code 22384109B.